Success Technic Industries
Industries Selesa Jaya,
Off Jalan Balakong,
43000 Seri Kembangan,
Selangor, Malaysia.
Malaysia
+6012-322 2577 (Mr Wong)
+6013-957 9148 (Kenny)
+6013-957 9148 | |
kenny968178 | |
dynaken | |
successte wong | |
ppgg26 | |
2074517608 | |
my1007542573 |
BT200B-200 100 liter tank bottom mount homogenizer
Previous | 12 / 33 | Next |
This is the only type of homogenizer that allows for efficient processing of products where the primary mixture contains settling particles that are difficult to process with an immersion homogenizer or an inline homogenizer.
The highest possible efficiency in terms of power versus production capacity.
-There is no need for a piping.
-You don’t have to pump the product around.
-There is no need for a recirculation loop
-The intensive flow created by the homogenizer allows for even homogenizing of the entire product irrespective of the tank capacity.
-Seals are cooled effectively by the product.
Bottom homogenizers work independently and effectively when processing products with low viscosity and when dissolving powder components. When working with viscous products, the homogenizer is used with a low-speed agitator or scrapers.
The product is sucked with great intensity into the central part of the working body and is radially ejected with high shearing force, passing through the rotor/stator. A high degree of homogenization and blending is achieved after only a few passes through this loop.
bottom homogenizers work effectively with tanks at atmospheric pressure, with vacuum tanks, or with high pressure.
The bottom homogenizer may have only one or two stages of homogenization, or it have also have ultra high shear version depending on the desired application.