Success Technic Industries
27, Jalan 6/2,
Taman Industries Selesa Jaya,
Off Jalan Balakong,
43000 Seri Kembangan,
Selangor, Malaysia.
+603-8961 4628
+603-8961 7048

 +6017-357 6175
 successte wong

FP800-F200 auto flat surface labelling machine

Previous 3 / 3 Next

FP800-F200 auto flat surface labelling machine labelling machine FP800 small filling,capping,sealing,labelling machine

The FP800-F200 auto flat surface labelling machine is configured for from above or below is a well planned solution; Used on Flat products or Tub/Jar Products the machinery has FP800-F200 accuracy and ease of settings. If you have products needing one, two or even three labels, the FP800-F200 has the forethought of design to make the job simple to set-up again and again. The picture below shows how a Top and Bottom Labelling machine is configured with two Main Conveyors; one after the other. The gap between the two main conveyors gives the necessary access to label the product from below. 

Label Specifications that can be Catered For:
  • Label minimum thickness – 70micron
  • Label reel core size – 76mm inside diameter
  • Label reel outside diameter – 380mm (std)
  • Label minimum size – Vertical 15mm/Horizontal 15mm
  • Label web maximum height – 80/160/215/260mm (selected at the time of order)
  • Label gap minimum size – 2.5mm

Labeling Head Specifications:

  • Speed Synchornised to Label Feed with Digital Ratio User Setting (standard)
  • Dispensing speed minimum – 5m/min (Standard)
  • Dispensing speed maximum – 30m/min (Standard)
  • Label accuracy ± 0.75mm – not including variations due to the Bottles or Labels
  • Stepper motor drive – 5 Phase – Note older machine designs use a 2 Phase Motor that is more Coarse and Hot in operation
  • Missing label detection (Standard)
  • Low-level roll detection (Standard)
  • Un-locked Drive Roller Assembly alarm (Standard)
  • Clear label gap sensor (optional)
  • Label verification (optional)

Job Memory:
120 jobs

It is a planar/ right-angle labeler applicable for labeling on flat and irregular shaped bottles, paper boxes, tabs and plastic bags. For example, it can be used for electronic supervision code label and right-angle label. We can design in cylinder feeding or cylinder collecting structure to meet customer's requirement.

Products Diameter Width: 8mm~92mm
Height: £¼170mm
Dimension 1600mm×560mm×1600mm
Speed of Labeling and Electric Coding 0~140£¨bottles/minue£©
Precision ±1.5mm
Inner Diameter Roll φ76mm
Outer Diameter Roll φ300mm
Label Height 10mm~90mm
Label Length 15mm~250mm
Conveyor Direction L→R / R→L
Electrical Requirements 220V50HZ
Power 700W
Label Size Determined by The Size of The Bottle
Weight of Label No Requireme

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  

Our Products:
Switch to Mobile Version